Post Offer Free
Dongguan Uchi Electronics Co.,Ltd.  

Gold Index: 9564

You are here: home  > NTC Temperature Sensor  > Oven Thermistor Probe 1.388M ohm 4500K / RTD Temperature Probes

Oven Thermistor Probe 1.388M ohm 4500K / RTD Temperature Probes 

Place of Origin: Guangdong, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: 1.388Mohm 4500K


Oven Thermistor Probe 1.388M ohm 4500K / RTD Temp

Oven Thermistor Probe 1.388M ohm 4500K / RTD Temperature Probes

 

Quick Detail:

 

 

Closed end flanged stainless steel NTC thermistor temperature sensor probe for fryer, roaster, toaster,standard domestic oven, microwave oven, electric cooker, other application includes automotive engines and exhaust, industrial process control, etc.

 

 

Description:

 

NTC Thermistor can be assembled in housing in a variety of configurations for temperature sensing, measurement, detection, indicator, monitoring and control. Thermistor temperature sensor probe assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature.The choice of assembly is dependent on the application. The primary factors which determine the optimum configuration of a thermistor assembly are the operating environment, mounting, time response and minimum dissipation constant.
The two factors which do vary considerably with thermistor sensor probe assembly design are time constant and dissipation constant. The time constant will typically be of greater duration in encapsulated thermistors. This is, of course, due to additional mass surrounding the thermistor element; therefore, extending the thermal transfer time. Dissipation constant will also be greater in assemblies. The additional housing mass serves well as a heat sink. Greater power is therefore required to induce self-heating. Both time constant and dissipation constant will vary with the selected thermistor and housing. Heat transfer properties of the housing, thermistor location, mass and wire type determine these constants.
Applications for temperature sensing include air temperature sensors, surface temperature sensors and immersion temperature sensors. Housings for air temperature sensors are often simple, inexpensive devices such as molded plastic shells, deep-drawn brass or aluminum cylinders, or even stainless steel tubes. Surface temperature sensors are designed to match the contour of the surface to be sensed, whether it's flat, curved, or round. Mounting holes or clips are often used to simplify installation of the sensor. Immersion temperature sensors are designed so that the sensing element will be surrounded by the medium to be sensed, often times a liquid. The sensing portion will normally protrude through a hole or orifice while a portion of the assembly will remain outside the medium to allow for the signal to be read. Immersion housings are usually threaded to allow them to be screwed into a hole or opening. Immersion part requests to be liquid and humidity prevention.
The material used for the housing will be dependent upon the temperature range needed, response time, cost, and special considerations such as UL, FDA or NSF requirements in food and/or medical applications. Some of the materials available include stainless steel, copper, plastic, teflon, brass, aluminum, epoxy and heat shrinkable tubing.

 

 

Applications:

 

 
 
Closed end flanged stainless steel NTC thermistor temperature sensor probe for fryer, roaster, toaster,standard domestic oven, microwave oven, electric cooker, other application includes automotive engines and exhaust, industrial process control, etc.

 

 

Specifications:

 

 

Resistance @25C

Resistance @200C

Beta Value
B(25/50C)

Voltage withstanding

Thermal time constant

Operating temperature range

 1.388M ohm

 4K Ohm

4500K

1800VAC/2 seconds

20 sec

-30C+280C

Note: Alternative ratings on resistance, Beta value and cable length upon request.

 

Drawing

 

 

 

 

 

Competitive Advantage:

 

  1. Factory supply directly
  2. Completed certificates such as UL,VDE,SGS,etc and high quality available
  3.  Quick delivery
  4. Best after-sales services
  5. OEM & ODM available

 

 

bigPhoto
 Mr. James

Tel: 86-769-86183707
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Dongguan Uchi Electronics Co.,Ltd. [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like: