Post Offer Free
Dongguan Uchi Electronics Co.,Ltd.  

Gold Index: 9564

You are here: home  > PTC Thermistor  > 500V 330 Ohm PTC Bead Thermistor / Temperature Sensor Thermistor For Street LED
Enlarge 500V 330 Ohm PTC Bead Thermistor / Temperature Sensor Thermistor For Street LED

500V 330 Ohm PTC Bead Thermistor / Temperature Sensor Thermistor For Street LED 

Place of Origin: Guangdong, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: MZ4A04D75C330RN500V


500V 330 Ohm PTC Bead Thermistor / Temperature Se

500V 330 Ohm PTC Bead Thermistor / Temperature Sensor Thermistor For Street LED

 

Quick Details

 

Compliant with ITU-T K20 K21 K45 

--Basic level lightning surges (10/700μs)
--Basic level power Induction (600V,1A,0.2S)
--Power contact criteria A/B (230V,15min.)
Suitable for continuous connection to main voltage 110/230 VAC in tripped (high ohmic) condition.
Round leadless disk thermistor availble for combined usage of PTC and primary protection, e.g gas arrestor.
Typical Resistance @25C (R25) 10 ohm, 12 ohm, 18 ohm, 20 ohm, 25 ohm, 50 ohm, 55 ohm.
Matching available with narrow resistance tolerance.
Tight resistance tolerance maintained after switching.
Negligible resistance drift after soldering or switching.

 

 

Description

 

This series of ceramic PTC (positive temperature coefficient ) thermistors help provide protection against power cross, power induction surges and lighting surge defined in ITU, Telcordia, UL. Available in chip, radial-leaded coated and non-coated, SMD, twin vertical surface mount configuration. PTC thermistor overcurrent protector provides reversible, self-resetting protection against over-currents of telecommunication line protector units, improve the reliability of custom premises and network equipment.
Ceramic PTC thermistors can be found providing re-settable line protection at the exchange, monitoring hot spots and protecting ringers, battery feeds, transformers and relay circuits. Also used extensively to protect the mobile phone's battery pack against overcharging in land-based and radio mobile communications.

Advanced developments in telecom equipment in recent years have radically altered the protection requirements of both exchange and subscriber equipment. The PTC thermistor must protect the telephone line circuit against overcurrent, which may be caused by the following examples:
Surges due to lighting strikes on or near to the line plant.
Short-term induction of alternating voltage from adjactent power lines or railway systems, usually caused when these lines or systems develop faults
Direct contact between telephone lines and power lines.
To provide good protection under such conditions, a PTC thermistor is connected in series with each line, usually as secondary protection; However, even with primary line protection (usually a gas discharge tube), the PTC thermistor must fulfill severe requirements.
Surge pulses of upto 2KV can occur and in order to withstand short term power induction, the PTC thermistor must withstand high voltages. If the line has primary protection, a 220V to 300V PTC thermistor is adequate. Without primary protection, 600V PTC device is necessary. We can manufacture a series of PTC thermistor fulfilling both requirements.

 
 

Application

 
It's applicable to various types of fluorescent lamp, electronic ballast and electronic energy-saving lamp. The PTC can be connected across the lamp resonator without changing the circuits. It can change hard start of the ballast and electronic energy-saving lamp to preheated start and the preheating time of the filament can come up to 0.4-2 seconds, which will extend the service life of the fluorescent tube by over 4 times.
 
 

Specification

 

1,Symbol for the products

1-1,Symbol for the products

 

                 MZ4

Note

 

Company    symbols

 MZ4          Type Number

2,Specifications of Appearance

 

 

 

2-1,Dimensions (mm)

Number

Name

Technical Requirements

Leads

D

Diameter of Resistance

5.0max

Straight

 

Axis Formed

 

In-Forming 

T

Thickness of Resistance

4.5max

L

Length of fuse

Min20

W

bigPhoto
 Mr. James

Tel: 86-769-86183707
Contact to this supplier

Related Search

Ntc Thermistor Temperature Sensor    PTC Thermistor    Thermistor    NTC Thermistor    Temperature Sensor    Led Street    More>>

Find more related products in following catalogs on Hisupplier.com

Electronic & Electrical >> Electronic Data Systems

Company Info

Dongguan Uchi Electronics Co.,Ltd. [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (195)